USB2PMB1 datasheet(3/15 Pages) MAXIM

3 / 15 page

Maxim Integrated │ 3

www.maximintegrated.com

USB2PMB1# Adapter Board

Evaluates: Munich (USB2PMB1#)

Procedure

1) Go

www.maximintegrated.com/evkitsoft-

ware to download the most recent version of the

Munich board software,

MUNICH GUI. Save the

software to a temporary folder and decompress the

Munich_GUISetupV2.03.zip file.

2) Connect the USB cable between the Munich board

and the PC; the USB driver is installed automatically.

3) Ensure that the companion SPI interface device’s

jumper settings are correct. Refer to your companion

device’s documentation.

4) Connect the Munich board’s 2x6-pin right-angle con-

nector to the companion device’s 2x6-pin right-angle

header.

Detailed Description of Software

Graphical User Interface (GUI)

1) Once the Munich board is connected with the compan-

ion device, open the

MUNICH GUI.exe (double-click)

software.

2) Start the Munich board software and select the tab

sheet that corresponds to the companion device as

shown in Figure 5, the Munich GUI.

3) Press the

Scan Devices pushbutton to scan the

available Munich boards connected to the computer.

This allows the user to test multiple companion driver

boards at the same time. Each Munich board has a

unique ID that the software determines.

Figure 5. Munich GUI

Figure 5

USB2PMB1 데이터시트(PDF) 3 Page - Maxim Integrated Products