USB5916CSLASHKD datasheet(54/66 Pages) MICROCHIP

54 / 66 page

USB5916

DS00002243E-page 54



2016-2021 Microchip Technology Inc.

10.6.4

USB TIMING

All device USB signals confirm to the voltage, power, and timing characteristics/specifications as set forth in the Univer-

sal Serial Bus Specification. Please refer to the Universal Serial Bus Revision 3.2 Specification, available at http://

www.usb.org/developers/docs.

10.6.5

I2C TIMING

All device I2C signals confirm to the 100KHz Standard Mode (Sm) voltage, power, and timing characteristics/specifica-

tions as set forth in the I2C-Bus Specification. Please refer to the I2C-Bus Specification, available at http://www.nxp.com/

documents/user_manual/UM10204.pdf.

10.6.6

SMBUS TIMING

All device SMBus signals confirm to the voltage, power, and timing characteristics/specifications as set forth in the Sys-

tem Management Bus Specification. Please refer to the System Management Bus Specification, Version 1.0, available

at http://smbus.org/specs.

10.6.7

SPI TIMING

This section specifies the SPI timing requirements for the device.

FIGURE 10-5:

SPI TIMING

TABLE 10-8: SPI TIMING (30 MHZ OPERATION)

Symbol

Description

Min

Typ

Max

Units

tfc

Clock frequency

MHz

tceh

Chip enable (

SPI_CE_EN) high time

100

tclq

Clock to input data

tdh

Input data hold time

tos

Output setup time

toh

Output hold time

tov

Clock to output valid

tcel

Chip enable (

SPI_CE_EN) low to first clock

tceh

Last clock to chip enable (

SPI_CE_EN) high

SPI_CLK

SPI_DI

SPI_DO

SPI_CE_N

tcel

tfc

tclq

tceh

tdh

toh

tos

tov

toh

USB5916C/KD 데이터시트(PDF) 54 Page - Microchip Technology

USB5916C/KD 데이터시트(HTML) 54 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

데이터시트 다운로드

링크 URL