VC-714

DS20006509B-page 2



2021 Microchip Technology Inc.

1.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings †

Supply Voltage .......................................................................................................................................... –0.3V to +4.5V

ESD Rating, Human Body Model (Note 1).................................................................................................................2 kV

ESD Rating, Charged Device Model (Note 1)...........................................................................................................200V

† Notice: Stresses in excess of the Absolute Maximum Ratings can permanently damage the device. Functional

operation is not implied at these or any other conditions in excess of conditions represented in the operational sections

of this data sheet. Exposure to Absolute Maximum Ratings for extended periods may adversely affect device reliability.

Note 1: Although ESD protection circuitry has been designed into the VC-714, proper precautions should be taken

when handling and mounting. Microchip employs a Human Body Model (HBM) and a Charged Device Model

(CDM) for ESD susceptibility testing and design protection evaluation. ESD thresholds are dependent on

the circuit parameters used to define the model. Although no industry standard has been adopted for the

CDM, a standard resistance of 1.5 kΩ and capacitance of 100 pF is widely used and therefore can be used

for comparison purposes.

ELECTRICAL CHARACTERISTICS, LVPECL OPTION

Parameter

Sym.

Min.

Typ.

Max.

Units

Conditions

Supply Voltage (Note 1)

2.375

2.5

2.625

V

Ordering Option

3.135

3.3

3.465

Current Consumption

—

—

70

mA

—

Frequency

Nominal Frequency

100

—

320

MHz Ordering Option

Stability (Note 2)

—

—

—

±25

ppm

Ordering Option

—

—

±50

—

—

±100

Outputs

Output Logic Level High (Note 3)

1.085

—

0.880

V

Output Logic Level Low (Note 3)

1.810

—

1.620

Output Logic Level High (Note 3)

1.085

—

0.880

V

Output Logic Level Low (Note 3)

1.810

—

1.620

Output Rise and Fall Time (Note 3)

—

—

400

ps

—

Load

—

—

—

Note 1: The VC-714 power supply should be filtered. For example, a 10 µF, 0.1 µF, and 0.01 µF capacitor.

2: Includes calibration tolerance, operating temperature, supply voltage variations, aging, and IR reflow.

3: Figure 1-1 defines the test circuit and Figure 1-2 defines these parameters.

4: Duty Cycle is measured as On/Time Period.

5: Measured using an Agilent E5052 Signal Source Analyzer at 25°C.

6: Outputs will be enabled if Enable/Disable is left open. There is an oscillation detection circuit that ensures

glitch free output upon power-up or enable.