30

NXP Semiconductors

80310

7

Revision history

Revision

Date

Description of changes

1.0

12/2008

• Initial Release

2.0

5/2011

• Add ESD values and electrical characteristics table + graphs

• Remove backmetal option

• Add Table1 Page 2. Version-determined Electrical parameters

• Change Thermal Shutdown value, Modification in the LIN fault detection paragraph.

• Change wording in LIN Fault detection paragraph

• Add machine Model in electrical ratings table

• Change LIN timeout value (1.3s instead of 8s) + slight changes in diagrams

• Wording change

• Change in table 1 page 3 on BUS inactivity column from 3/8 to 1.31/3

• Change in figure 1 and 2 + device table

• Added TC80310AWS to the ordering information

3.0

8/2012

• Replaced TC80310xWS by TC80310xHWS in Table 1, Version determined electrical parameters

• Replaced Die Back Metal Composition "Cr/CrAg/Ag" by "Ti/Ni/V/Ag" in Table 16, Physical die characteristics

• Updated BYTE 3 in Data field description for alternator A write command: ID = 29 17

• Updated BYTE 3 in Data field description for alternator B write command: ID = 2A 18

• Updated BYTE 3 in Data field description for alternator A+B write command: ID = 2B(20) 19

• Updated BYTE 1 in Data field description for alternator B read command: ID = 14 19

• Updated Freescale form and style

4.0

12/2013

• Added the description “The MID 0x27 is reserved. Therefore, especially if other nodes than the 80310 are placed

on the LIN bus, the MID 0x27 is forbidden” under Table 8, LIN byte/direction data format on page 17.

5.0

1/2015

• Replaced TC80310xHWS by TC80310AxHWS in Table 1, Version determined electrical parameters

• Added TC80310BxHWS to the ordering information

• Modified as per PB #16598

8/2016

• Updated to NXP document form and style