6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)

MIN

MAX UNITS

Supply voltage A

–0.5

4.2

V

Supply voltage B

–0.5

4.2

V

Input Voltage(2)

I/O Ports (A Port)

–0.5

4.2

V

I/O Ports (B Port)

–0.5

4.2

Control Inputs

–0.5

4.2

Voltage applied to any output in the high-impedance or power-off state(2)

A Port

–0.5

4.2

V

B Port

–0.5

4.2

Voltage applied to any output in the high or low state(2) (3)

A Port

V

B Port

Input clamp current

–50

mA

Output clamp current

–50

mA

Continuous output current

–50

50

mA

–100

100

mA

Junction Temperature

150

°C

Storage temperature

–65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress

ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under

Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device

reliability.

(2)

The input voltage and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.

(3)

The output positive-voltage rating may be exceeded up to 4.2 V maximum if the output current rating is observed.

6.2 ESD Ratings

VALUE

UNIT

Electrostatic discharge

Human body model (HBM), per AEC Q100-002(1)

±8000

V

Charged device model (CDM), per AEC Q100-011

±1000

(1)

AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001

specification.

SN74AXC2T45-Q1

SCES928A – APRIL 2021 – REVISED SEPTEMBER 2021

www.ti.com

4

Submit Document Feedback

Copyright © 2021 Texas Instruments Incorporated

Product Folder Links: SN74AXC2T45-Q1