AS5600L datasheet(34/48 Pages) AMSCO

34 / 48 page

Page 34

ams Datasheet

Document Feedback

[v1-12] 2020-May-14

AS5600L − Register Description

Hysteresis

To avoid any toggling of the output when the magnet is not

moving, a 1 to 3 LSB hysteresis of the 12-bit resolution can be

enabled with the HYST bits in the CONF register.

Magnet Detection

As a safety and diagnostic feature, the AS5600L indicates the

absence of the magnet. If the measured magnet field strength

goes below the minimum specified level (Bz_ERROR), the

output is driven low, without regard to the MD bit in the STATUS

Low Power Modes

A digital state machine automatically manages the low power

modes to reduce the average current consumption. Three low

power modes are available and can be enabled with the PM bits

in the CONF register. Current consumption and polling times

are shown in Figure 8.

Automatic Low Power Mode Timer

The automatic low power mode timer allows saving power by

switching into LMP3 if the angle stays within the watchdog

threshold of 4 LSB for at least one minute, as shown in Figure 35.

The watchdog function can be enabled with the WD bit in the

CONF register.

Figure 35:

Automatic Low Power Mode Timer Function

1 minute

Watchdog

threshold

LPM3

NOM,LPM1,

LPM2

NOM,LPM1,

LPM2

Output Value

4 LSB

AS5600L 데이터시트(PDF) 34 Page - ams AG