*

New

*

New

Control at the push of a button

4

5

Digital/Analog Inputs

Each SmartRelay is equipped with 8 digital inputs for you to utilize in your applications.

On selected models such as FL1D-H12RCE, FL1D-B12RCE and FL1D-H12SND, inputs 5

and 6 can be used as fast inputs up to 2 kHhz and inputs 7 and 8 can be configured as

0-10V analog inputs. A maximum of 24 digital inputs can be utilized with this system

using digital expansion modules.

Operational Control Buttons

IDEC SmartRelays can be programmed

with just the push of a button! Control

buttons can be used to program, modify

and change preset parameters. The four

cursor keys can also be configured as

inputs if needed.

Digital Outputs

IDEC SmartRelays are equipped with 4 relay outputs rated at

10A/pt. A maximum of 16 outputs can be configured with this

system using digital expansion modules.

DIN Rail or Surface Mountable

Backlit LCD Display

System status — input, output, analog values,

timers and counters — can be monitored through

an embedded 4x12 LCD on your SmartRelay. This

allows you to display a predefined message with up

to 48 characters chosen from 103 special character

types.

You can now adjust the contrast on

your display screen to your preference. Non-LCD

versions are also available.

EEPROM memory

Never worry about your program being lost again! With IDEC SmartRelays, your program

is stored in a non-volatile EEPROM.

Password Protection

Concerned about your program being copied or altered? IDEC SmartRelays keep you safe

with a unique password protection scheme allowing end users to access certain param-

eters without seeing or modifying the actual program.

Large Program Capacity

Running out of program space is a thing of the past. IDEC SmartRelays can handle up to

130 function blocks (2000 bytes).

Integrated Functions

8 predefined basic function blocks and 28 special function blocks ensure that almost all

your conventional switching devices — timers and counters — can be replaced. Three

functions include a PI controller (e.g. for temperature control), a two-stage ramp

function (e.g. for the control of frequency converters) and an analog multiplexer (e.g. for

light control). See page 9.

Quality

IDEC means quality and dependability you can trust and our SmartRelays are no exception.

Each model is cULus listed, CE certified, EMC compliant, FM approved for Class 1 Div 2

hazardous locations, C-tick compliant, Lloyds Registered, and ABS approved.

Universal Voltages

SmartRelays are available in 12/24VDC, 24VAC/DC, and

100-240VAC/DC voltages.

Expansion Modules

Just snap-on and go! No cable required. Each

digital expansion module has 4 inputs and 4 outputs

available in 12/24VDC, 24VAC/DC and 100-240VAC/DC.

Up to 4 expansion modules can be mounted on an

IDEC SmartRelay base module. Plus SmartRelay

also has the capability to communicate within a

Analog Inputs & Outputs

Using the 2-pt analog input and 2-pt analog output

expansion modules allows you to easily control and

process your analog signal. IDEC SmartRelays can

control and process 0-10V and 4-20mA signals with

a 10-bit resolution. Up to 4 analog input and 1 analog

output modules can be attached to the base module.

Multifunction Interface

If you prefer not to program your

SmartRelay using the LCD and keypad,

simply connect the interface cable to

your PC and program with our WindLGC

software instead. Or you can plug-in the

special memory cartridge (FL1C-PM3)

and have your SmartRelay operate the

circuit program through the cartridge itself.

www.idec.com/smartrelay

R

FM

APPROVED