1

Power Entry Modules with Line Filter

DC12

https://www.schurter.com /PG06

EMC Products

IEC Appliance Inlet C14 with Filter, Line Switch 1- or 2-pole, Front or Rear Side Mounting

Screw-on mounting

from front side

Snap-in version

from front side

Screw-on mounting

from front side, protection class II

See below:

Approvals and Compliances

C14

70° C

C18

70° C

Description

- Panel mount :

Screw-on version from front or rear side, snap-in version front side

- 3 Functions :

Appliance Inlet protection class I or II , Line Switch 1- or 2-pole , Line

filter in standard and medical version

- Quick connect terminals 6.3 x 0.8 mm

Unique Selling Proposition

- Compact power entry module

- Available in white or black

- Switch for high inrush current

- V-Lock cord retaining

Characteristics

- Compact design with optimal shielding

Rear side mounting for efficient costsaving assembly

- All single elements are already wired

- Line switch non-illuminated or illuminated

- Universal line filter for standard applications

- Ideal for application with high transient loads

- For applications according IEC/UL 62368-1 we recommend variants

with bleed resistor

Suitable for use in medical equipment according to IEC/UL 60601-1 (1

MOOP, 1 MOPP)

Other versions on request

- Solder terminals

- Other rocker marking

- Capacitance CX1

References

Alternative: version without line filter DC11

Substitute for type KFB1; KFB2

Weblinks

pdf data sheet, html datasheet, General Product Information, Approvals,

Distributor-Stock-Check, Accessories, Detailed request for product

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.

The cord latching system prevents against accidental removal of the cordset.

Technical Data

Ratings IEC

1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz

Ratings UL/CSA

1 - 10 A @ Ta 40 °C / 250 VAC; 60 Hz

Leakage Current

standard < 0.5 mA (250 V / 60 Hz)

medical < 5 µA (250 V / 60 Hz)

Dielectric Strength

> 1.7 kVDC between L-N

> 2.7 kVDC between L/N-PE

Test voltage (2 sec)

Allowable Operation Tempe-

rature

-25 °C to 85 °C

Climatic Category

25/085/21 acc. to IEC 60068-1

IP-Protection

front side IP40 acc. to IEC 60529

Protection Class

Suitable for appliances with protection

class I or II acc. to IEC 61140

Terminal

Quick connect terminals 6.3 x 0.8 mm

Panel Thickness S

Screw: max 8 mm

Mounting screw torque max 0.5 Nm

Snap-in: 1 mm to 3 mm

Material: Housing

Thermoplastic, black / white, UL 94V-0

Appliance inlet/-outlet

C14 / C18 acc. to IEC 60320-1,

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class I or II

Line Switch

Rocker switch 1-/2-pole, non-illumina-

ted or illuminated, acc. to IEC 61058-1

Technical Details

Line Filter

Standard and Medical Version, IEC

60939, UL 1283, CSA C22.2 no. 8

Technical Details

MTBF

> 1'900'000 h acc. to MIL-HB-217 F

Approvals and Compliances