The Standard ship method for volume production of the CS-300 series is in a matrix tray. These

trays are 100% recyclable. The trays also offer the added feature that they can be continuously

feed into a pick-n-place machine eliminating the down time required with tape-n-reel.

Although protection circuitry has been

designed into this device, proper precautions

should be taken to avoid exposure to

electrostatic discharge (ESD) during handling

and mounting. VI employs a human-body

model (HBM) and a charged-device model

(CDM) for ESD-susceptibility testing and

protection design evaluation. ESD voltage

thresholds are dependent on the circuit

parameters used to define the mode.

Although no industry-wide standard has been

adopted for the CDM, a standard HBM

(resistance = 1500 ohms, capacitance =

100pf) is widely used and therefore can be

used for comparison purposes. The HBM

ESD threshold presented here was obtained

by using these circuit parameters.

ESD Threshold Voltage

Model

Threshold

Unit

Human-Body (HBM)

Charged-Device

500

500

V min

V min

0.85

0.125

0.16

0.125

VI - Logo

This Cell only

4.00

0.125

12 15/16

0.235

0.235

3 x 12 Array / 36 units per tray

1.05

0.255“deep

Pin 1

This Corner