For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

6

6 - 8

Evaluation PCB

the circuit board used in the application should

use rf circuit design techniques. signal lines

should have 50 ohm impedance while the package

ground leads and exposed paddle should be con-

nected directly to the ground plane similar to that

shown. a sufficient number of via holes should be

used to connect the top and bottom ground planes.

the evaluation circuit board shown is available from

Hittite upon request.

item

Description

J1 - J4

pCB mount sma Connector

J6, J8, J9

DC pin

C1, C2, C13

0.1 µf Capacitor, 0402 pkg.

C5 - C7

1 nf Capacitor, 0402 pkg.

C14

4.7 µf Capacitor, 0402 pkg.

C16

100 pf Capacitor, 0402 pkg.

C17

10 nf Capacitor, 0402 pkg.

r1 -r4

0 Ohm resistor, 0402 pkg.

r7

620 Ohm resistor, 0402 pkg.

U1

HmC750lp4(e) limiting amplifier

121598 evaluation pCB

[1] reference this number when ordering complete evaluation pCB

[2] Circuit Board material: arlon 25fr

HMC750LP4 / 750LP4E

v03.0111

12.5 Gbps LIMITING AMPLIFIER

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D