–

–

5

Pad Layout

Figure 5 shows the recommended PCB layout for the EVM-fff-PRC

evaluation module. This is used with the CON-SOC-EVM socket and

connector set and is implemented on the Master Development System.

Figure 6 shows the recommended PCB layout for the EVM-fff-PRC-CAS

and EVM-fff-PRC-UFL. These variants do not use the MMCX connector for

the antenna, but are otherwise the same.

5 x Ø0.035”

51 x Ø0.026”

0.05”

0.05”

0.05”

0.05”

0.05”

0.09”

0.18”

0.80”

0.05”

0.07”

0.045”

0.075”

0.065”

1.17”

0.97”

0.05”

Figure 5: EVM-fff-PRC PCB Layout Dimensions

51 x Ø0.026”

0.05”

0.09”

0.18”

0.80”

0.05”

0.07”

1.17”

0.97”

0.05”

Figure 6: EVM-fff-PRC-CAS and EVM-fff-PRC-UFL PCB Layout Dimensions