USER INTERFACE, ALERTS & CONTROLS

Front Panel LCD Display

Digital display reports load level in amps for LOAD BANK 1 (Outlets 1-12), LOAD BANK 2 (Outlets 13-24), LOAD

BANKS 1&2 COMBINED (Outlets 1-24) and each individual output receptacle; Digital display can also be used to

scroll the configured IP address

Front Panel LEDs

BANK 1 and BANK 2 LEDs verify which load bank the digital current display is reporting (Bank 1, Bank 2 or Banks

1&2 Combined); BANK 1 or BANK 2 LED will flash when the digital display is reporting output current for one of the

outlets in that load bank; 24 additional LEDs, one near each output receptacle, will light continuously to verify power

on/off status and flash to indicate that the digital display is reporting output current for just that individual receptacle.

Network Link/Activity Status LED (Yellow), Network Speed LED (Green); LX Platform status LED (Green)

Switches

SELECT OUTLET and SELECT BANK switches advance the LCD screen and associated LED to display power

consumption for individual output receptacles and output load banks; Press and hold the SELECT BANK button for 4

seconds to rotate the digital display 90 degrees for overhead power input; Press and hold the SELECT OUTLET

button for 4 seconds to scroll the configured IP address. LX Platform Interface: Recessed reset switch for interface

reboot and factory reset

Current Measurement Accuracy

(Amps)

+/-1%

Voltage Measurement Accuracy

(Volts)

+/-1%

Power Measurement Accuracy

(Watts)

+/-1%

PHYSICAL

Form Factors Supported

0U vertical rackmount; includes rackmount brackets. Supports toolless mounting in button-mount compatible racks

PDU Form Factor

Vertical (0U)

Shipping Dimensions (hwd / cm)

13.72 x 17.27 x 193.29

Shipping Dimensions (hwd / in.)

5.40 x 6.80 x 76.10

Shipping Weight (kg)

7.48

Shipping Weight (lbs.)

16.50

Unit Dimensions (hwd / cm)

178 x 5.6 x 6.6

Unit Dimensions (hwd / in.)

70 x 2.2 x 2.6

Unit Weight (kg)

5.44

Unit Weight (lbs.)

12

ENVIRONMENTAL

Storage Temperature Range

-30°C to +50°C (-22°F to +122°F)

Relative Humidity

5 to 95% non-condensing

COMMUNICATIONS

Network Monitoring Port

RJ45 Network port, RJ45 Config/Console Access port; USB A port supports a variety of Envirosense2 environmental

and control modules. See Accessories>Management Hardware section for more information about these modules.

SNMP Compatibility

Pre-installed LX platform interface provides remote monitoring via Java-free HTML5 web interface, telnet, SSH, CLI

and SNMP management systems

SPECIAL FEATURES

3 / 4