ST25DV16K datasheet(11/200 Pages) STMICROELECTRONICS

부품명	ST25DV16K

상세설명	Dynamic NFC/RFID tag IC with 4-Kbit, 16-Kbit or 64-Kbit EEPROM, and fast transfer mode capability

PDF	200 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

11 / 200 page

Figure 7. Memory organization

Area 1

Area 2

Area 3

Area 4

CC File

Dynamic registers

Fast Transfer Mode

256 Bytes buffer

Static configuration registers

Device information

UID, AFI, DSFID

Passwords

Always readable

User memory

(EEPROM up to 64-Kbits)

Password protected

System configuration

(EEPROM)

Password protected

Dynamic configuration

and activity status

Fast Transfer Mode mailbox

4.2

User memory

User memory is accessible from both RF contactless interface and I2C wired interface.

From RF interface, user memory is addressed as Blocks of 4 bytes, starting at address 0. RF extended read and

write commands can be used to address all ST25DVxxx memory blocks. Other read and write commands can

only address up to block FFh.

From I2C interface, user memory is addressed as Bytes, starting at address 0. Device select must be set with

E2=0.

User memory can be read in continuity. Unlike the RF interface, there is no roll-over when the requested address

reaches the end of the memory capacity.

Table 2 shows how memory is seen from RF interface and from I2C interface.

ST25DV04K ST25DV16K ST25DV64K

User memory

DS10925 - Rev 9

page 11/200

ST25DV16K 데이터시트(PDF) 11 Page - STMicroelectronics