| 전자부품 데이터시트 검색엔진 |
|
STM32F373VC 데이터시트(PDF) 71 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F373VC 데이터시트(HTML) 71 Page - STMicroelectronics |
|
71 / 137 page ![]() DocID022691 Rev 7 71/137 STM32F373xx Electrical characteristics 114 6.3.6 Wakeup time from low-power mode The wakeup times given in Table 37 are measured from the wakeup event trigger to the first instruction executed by the CPU. The clock source used to wake up the device depends from the current operating mode: • Stop or sleep mode: the wakeup event is WFE. • The WKUP1 (PA0) pin is used to wakeup from standby, stop and sleep modes. APB1 peripherals µA/MHz APB1-Bridge(3) 6.9 TIM2 47.9 TIM3 36.8 TIM4 36.9 TIM5 45.5 TIM6 8.4 TIM7 8.2 TIM12 21.3 TIM13 14.2 TIM14 14.4 TIM18 10.1 WWDG 4.7 SPI2 24.3 SPI3 25.3 USART2 45.3 USART3 43.1 I2C1 14.0 I2C2 13.9 USB 27.9 CAN 38.1 DAC2 7.7 PWR 5.4 DAC1 14.8 CEC 5.4 1. When peripherals are enabled, power consumption of the analog part of peripherals such as ADC, DACs, Comparators, etc. is not included. Refer to those peripherals characteristics in the subsequent sections. 2. The BusMatrix is automatically active when at least one master is ON (CPU, DMA1 or DMA2). 3. The APBx Bridge is automatically active when at least one peripheral is ON on the same Bus. Table 36. Peripheral current consumption (continued) Peripheral Typical consumption(1) Unit |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |