| 전자부품 데이터시트 검색엔진 |
|
AD4697 데이터시트(PDF) 103 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD4697 데이터시트(HTML) 103 Page - Analog Devices |
|
103 / 107 page ![]() Data Sheet AD4697/AD4698 REGISTER INFORMATION analog.com Rev. 0 | 103 of 107 Table 51. Bit Descriptions for GP_MODE Bits Bit Name Description Reset Access 0x2: (WLCSP option): quad-SDO mode enabled. 0x3: single-SDO mode enabled. 1 BUSY_GP_EN Busy Indicator on General-Purpose Pin Enable Bit. Enables or disables the busy indicator on the general-purpose pin selected by the BUSY_GP_SEL bit if all higher priority functions are disabled (see the General-Purpose Pins section). 0x0 R/W 0: busy indicator on the general-purpose pin function disabled. 1: busy indicator on the general-purpose pin function enabled. 0 ALERT_GP_EN Alert Indicator on General-Purpose Pin Enable Bit. Enables or disables the alert indicator on the general-purpose pin selected by the ALERT_GP_SEL bit if all higher priority functions are disabled (see the General-Purpose Pins section). 0x0 R/W 0: alert indicator on the general-purpose pin function disabled. 1: alert indicator on the general-purpose pin function enabled. GPIO State Register Address: 0x0028, Reset: 0x00, Name: GPIO_STATE Table 52. Bit Descriptions for GPIO_STATE Bits Bit Name Description Reset Access [7:4] GPI_READ GPI State Field. Displays the state of each general-purpose pin configured as a general-purpose input (see the GPIO section). GPI_READ[3:1] always return 0 on the LFCSP option. 0x0 R [3:0] GPO_WRITE GPO State Control. Sets the state of each general-purpose pin configured as a general-purpose output (see the GPIO section). GPO_WRITE[3:1] are only active on the WLCSP option. Setting these bits on the LFCSP option has no effect. 0x0 R/W Temperature Sensor Control Register Address: 0x0029, Reset: 0x00, Name: TEMP_CTRL Table 53. Bit Descriptions for TEMP_CTRL Bits Bit Name Description Reset Access [7:1] RESERVED Reserved. 0x0 R 0 TEMP_EN Temperature Sensor Enable Bit. This bit enables or disables the temperature sensor in the channel sequence when the standard sequencer or advanced sequencer is enabled (see the Temperature Sensor section). 0x0 R/W 0: temperature sensor not included in the channel sequence. 1: temperature sensor included in the channel sequence. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |