SMS45 datasheet(7/20 Pages) SUMMIT

부품명	SMS45

상세설명	Quad Programmable Precision Cascade Sequencer and Supervisory Controller with 4k-Bit Nonvolatile Memory

PDF	20 Pages

Scroll/Zoom	100%

제조업체	SUMMIT [Summit Microelectronics, Inc.]

홈페이지	http://www.summitmicro.com

Logo

7 / 20 page

2079 1.2 05/24/04

SMS45

SUMMIT MICROELECTRONICS, Inc.

Preliminary Information

A1,A2 (6, 7)

A1 and A2 are the address inputs. When addressing the

SMS45 memory or configuration registers the address

inputs distinguish which one of four possible devices

sharing the common bus is being addressed.

SDA (9)

SDA is the serial data input/output pin. It should be tied to

VDD_CAP through a pull-up resistor.

SCL (10)

SCL is the serial clock input. It should be tied to VDD_CAP

through a pull-up resistor.

PUP#1, PUP#2, PUP#3 (4, 5, 13)

These are the power-up permitted (PUP) active low open

drain outputs. The PUP pins are used when the SMS45 is

programmed to provide the cascade sequencing of LDOs

or DC/DC converters (see Figures 1 and 5 for illustra-

tions of cascading). Each delay is independently enabled

and programmable for its duration (configuration register

7). If all PUP# outputs are enabled the order of events

would be as follows: V0 above threshold then delay to

PUP#1 turning on; V1 above threshold then delay to PUP#2

turning on; V2 above threshold then delay to PUP#3 turning

on. The delays are programmable.

PIN DESCRIPTIONS (CONTINUED)

SMS45 데이터시트(PDF) 7 Page - Summit Microelectronics, Inc.