| 전자부품 데이터시트 검색엔진 |
|
ATLS500MA103D 데이터시트(PDF) 12 Page - Analog Technologies, Inc. |
|
|
|||||||||||||||||||||||||||||
ATLS500MA103D 데이터시트(HTML) 12 Page - Analog Technologies, Inc. |
|
12 / 13 page ![]() 1161 Ringwood Ct, #110, San Jose, CA 95131, U. S. A. Tel.: (408) 748-9100, Fax: (408) 770-9187 www.analogtechnologies.com Copyrights 2000-2022, Analog Technologies, Inc. All Rights Reserved. Updated on 1/17/2022 Email: staff@analogti.com/sales@analogti.com 12 Analog Technologies Low Noise Constant Current Laser Controller ATLS500MA103 WARNING: Both the surface mount and the through hole types of modules can only be soldered manually on the board by a solder iron of < 310ºC (590ºF), not go through a reflow oven process. NOTE: The power supply may have overshoot, when happens, it may exceed the maximum allowed input voltage, 6V, of the controller and damage the controller permanently. To avoid this from happening, do the following: 1. Connect the controller solid well with the power supply before turning on the power. 2. Make sure that the power supply has sufficient output current. It is suggested that the power supply can supply 1.2 to 1.5 times the maximum current the controller requires. 3. When using a bench top power supply, set the current limit to >1.5 times higher than the maximum current the controller requires. 4. This laser driver can be evaluated by our evaluation board, ATLS1A103DEV1.0. ORDERING INFORMATION Part # Description ATLS500MA103D Controller in DIP package ATLS500MA103S Controller in SMT package ATLS500MA103-PD Controller with a pull-down resistor of 100k to the ground in SDN pin. PRICES Quantity 1 − 9 10 − 49 50 − 199 200-499 ≥500 ATLS500MA103D ATLS500MA103S ATLS500MA103-PD $71.4 $68.6 $64.6 $60.7 $56.7 RELATED PRODUCTS Part # Description Comments ATLS100MA103 Linear mode low noise 100mA constant current laser driver VVPS = 3.8V~5.5V; VOUT = 0V ~ (VVPS −1V); Output noise: ≤1.5µVP-P @0.1Hz to 10Hz; ATLS200MA103 Linear mode low noise 200mA constant current laser driver VVPS = 3.8V~5.5V; VOUT = 0V ~ (VVPS −1V); Output noise: ≤ 2.5µVP-P @0.1Hz to 10Hz; ATLS250MA103 Linear mode low noise 250mA constant current laser driver VVPS = 3.8V~5.5V; VOUT = 0V ~ (VVPS −1V); Output noise: ≤ 2.5µVP-P @0.1Hz to 10Hz; ATLS1A103 Linear mode low noise 1A constant current laser driver VVPS = 3.8V~5.5V; VOUT = 0V ~ (VVPS −1V); Output noise: ≤ 6µVP-P @0.1Hz to 10Hz; ATLS1A103DEV1.0 Evaluation board for ATLSXA103D series laser drivers Evaluate these laser drivers: ATLS100MA103D, ATLS200MA103D, ATLS250MA103D, ATLS500MA103D and ATLS1A103D. |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |