3 datasheet(5/8 Pages) CK-COMPONENTS

5 / 8 page

M–7

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ckswitches.com

COLOR/MARKING/STOPS

SEAL

Signal traces cut except for common(s).

FIG. 1

FIG. 2

9 ANY COMBINATION OF TERMINATION

CONFIGURATIONS OR SPECIAL TERMINATIONS.

P SOLDER PINS WITH .156” SPACING

N SOLDER PINS WITH .100” SPACING

1 TYPE 1, EXTENDED TYPE 0

0 TYPE 0

3 SEALED SWITCHING CONTACTS AND DUST LENS

2 DUST LENS. (Protects the character face of the wheel from abrasion and dirt).

1 SEALED SWITCHING CONTACTS. (Sealing is by means of an o-ring rotary seal and a cured-in-place elastomer gasket.

Switching contact area is protected from moisture, oil, and airborne contaminants.)

0 UNSEALED SWITCHING CONTACTS.

0 MATTE BLACK HOUSING (Gloss black wheel with white characters; no stops.)

PC Board 1/32” (0,79) thick.

NOTE: See function codes, pages M–4 and M–5, for signal locations.

NOTE: Stop pins are available separately, see page M–8.

Dust Lens

NOTE: All terminal holes shown may not be present for all function codes, consult Customer Service Center.

Terminal connector available for termination options 0 & 1, see page M–9.

Specify on configuration form, page M–10

and consult Customer Service Center.

Terminal Location Numbers

3 Series

Thumbwheel Switches

TERMINATIONS

NOTE: Termination option N (RoHS compliant) replaced termination option 3 (Non-RoHS compliant).

Termination option P (RoHS compliant) replaced termination option B (Non-RoHS compliant).

6 Mar 20

3 데이터시트(PDF) 5 Page - C&K Components