2352 Walsh Ave. Santa Clara, CA 95051. U. S. A. Tel.: (408) 748-9100, Fax: (408) 748-9111

www.analogtechnologies.com

Copyrights 2000 – 2013, Analog Technologies, Inc. All Rights Reserved. Updated on 1/17/2013

1

Analog Technologies

LP-200

Vacuum Sucking Pen

Figure 1. The Photo of Actual LP-200

Figure 2. The Photo of Actual LP-200

Figure 3. The Photo of Actual Probes

FEATURES

ESD safe

Low cost

Light weight

Small volume

Strong suction

APPLICATIONS

It’s widely used in SMT parts, metal parts, plastic parts or

any item having a smooth and nonporous surface that the

rubber vacuum tweezer tip can seal against.

DESCRIPTION

The LP-200 is a static safe vacuum PICK-UP kit. The kit

includes the tool as well as the 3 different angled lifting

needles with 3 sizes of high temperature, static safe suction

cups. Use the larger cups to pick up larger and heavier parts.

Cup is made of anti-static material and free of silicone. There

is no damage and pollution to the product.

It is especially convenient to drain electronic components

and small product.

OPERATION

Select a tip with a rubber vacuum cup on a probe that is

slightly smaller than the part you want to pick and place. Put

the probe snugly on the tip of the LP-200 tool. Make sure

that there is no dust on the rubber vacuum tip.

Note: Our larger rubber vacuum cups can be placed directly

on the LP-200 tip without using a probe.

Gently squeezing vacuum pen manual button parts, place the

soft suction cup squarely on the pick and place part, and then

relax your squeeze. The part is now firmly gripped.

Move the part to where you need it and a second squeeze of

the bulb releases the part.

Figure 4. The Photo of Actual Cups