Raspberry Pi 7” Touch Screen

Display

Fact Sheet

Description

The 7” Touch screen Monitor for Raspberry Pi gives users

the ability to create all-in-one, integrated projects such as

tablets, infotainment systems and embedded projects.

The 800 x 480 display connects via an adapter board

which handles power and signal conversion. Only two

connections to the Pi are required; power from the Pi’s

GPIO port and a ribbon cable that connects to the DSI port

present on all Raspberry Pi’s. Touch screen drivers with

support for 10-finger touch and an on-screen keyboard

will be integrated into the latest Raspbian OS for full

functionality without a physical keyboard or mouse.

Technical Specification

•

7” Touch screen Display.

•

Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)

•

Viewable screen size: 155mm x 86mm

•

Screen Resolution 800 x 480 pixels

•

10 finger capacitive touch.

•

Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.

•

Adapter board is used to power the display and convert the parallel signals from the display to

the serial (DSI) port on the Raspberry Pi.

•

Will require the latest version of Raspbian OS to operate correctly.

Kit Contents

•

7” Touch screen Display

•

Adapter Board

•

DSI Ribbon cable

•

4 x stand-offs and screws (used to mount the adapter board and Raspberry Pi board to the back

of the display

•

4 x jumper wires (used to connect the power from the Adapter Board and the GPIO pins on the

Pi so the 2Amp power is shared across both units)