PIC16F88-ISLASHML datasheet(23/214 Pages) MICROCHIP

23 / 214 page

 2003 Microchip Technology Inc.

Preliminary

DS30487B-page 21

PIC16F87/88

2.2.2.5

PIR1 Register

This register contains the individual flag bits for the

peripheral interrupts.

PIR1: PERIPHERAL INTERRUPT STATUS REGISTER 1 (ADDRESS 0Ch)

Note:

Interrupt flag bits are set when an interrupt

condition occurs, regardless of the state of

its corresponding enable bit, or the global

enable bit, GIE (INTCON<7>). User soft-

ware should ensure the appropriate inter-

rupt flag bits are clear prior to enabling an

interrupt.

U-0

R/W-0

R-0

R/W-0

—ADIF(1)

RCIF

TXIF

SSPIF

CCP1IF

TMR2IF

TMR1IF

bit 7

bit 0

bit 7

Unimplemented: Read as ‘0’

bit 6

ADIF: A/D Converter Interrupt Flag bit(1)

= The A/D conversion completed (must be cleared in software)

= The A/D conversion is not complete

Note 1: This bit is only implemented on the PIC16F88. The bit will read ‘0’ on the PIC16F87.

bit 5

RCIF: USART Receive Interrupt Flag bit

= The USART receive buffer is full (cleared by reading RCREG)

= The USART receive buffer is not full

bit 4

TXIF: USART Transmit Interrupt Flag bit

= The USART transmit buffer is empty (cleared by writing to TXREG)

= The USART transmit buffer is full

bit 3

SSPIF: Synchronous Serial Port (SSP) Interrupt Flag bit

= The transmission/reception is complete (must be cleared in software)

= Waiting to transmit/receive

bit 2

CCP1IF: CCP1 Interrupt Flag bit

Capture mode:

= A TMR1 register capture occurred (must be cleared in software)

= No TMR1 register capture occurred

Compare mode:

= A TMR1 register compare match occurred (must be cleared in software)

= No TMR1 register compare match occurred

PWM mode:

Unused in this mode.

bit 1

TMR2IF: TMR2 to PR2 Interrupt Flag bit

= A TMR2 to PR2 match occurred (must be cleared in software)

= No TMR2 to PR2 match occurred

bit 0

TMR1IF: TMR1 Overflow Interrupt Flag bit

= The TMR1 register overflowed (must be cleared in software)

= The TMR1 register did not overflow

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

PIC16F88-I/ML 데이터시트(PDF) 23 Page - Microchip Technology

PIC16F88-I/ML 데이터시트(HTML) 23 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL