LPS22CHTR datasheet(28/55 Pages) STMICROELECTRONICS

부품명	LPS22CHTR

상세설명	High-performance MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer

PDF	55 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

28 / 55 page

Digital interfaces

LPS22CH

28/55

DocID033100 Rev 2

Data are transmitted in byte format (DATA). Each data transfer contains 8 bits. The number

of bytes transferred per transfer is unlimited. Data is transferred with the most significant bit

(MSb) first. If a slave receiver does not acknowledge the slave address (i.e. it is not able to

receive because it is performing some real-time function), the data line must be kept HIGH

by the slave. The master can then abort the transfer. A LOW-to-HIGH transition on the SDA

line while the SCL line is HIGH is defined as a STOP condition. Each data transfer must be

terminated by the generation of a STOP (SP) condition.

In the presented communication format MAK is Master acknowledge and NMAK is no

master acknowledge.

Table 13. Transfer when master is writing multiple bytes to slave

Master

SAD + W

SUB

DATA

Slave

SAK

Table 14. Transfer when master is receiving (reading) one byte of data from slave

Master

SAD + W

SUB

SAD + R

NMAK

Slave

SAK

DATA

Table 15. Transfer when master is receiving (reading) multiple bytes of data from slave

Master ST SAD+W

SUB

SR SAD+R

MAK

NMAK SP

Slave

SAK

SAK DATA

DATA

LPS22CHTR 데이터시트(PDF) 28 Page - STMicroelectronics