WL-N/WLM-N

48

Operation of Fork Lever Locks

A Switch with a Fork Lever Lock is constructed so that the dog pushes the lever to invert the output and this inverted state is maintained even after

the dog moves on.

If the dog then pushes the lever from the opposite direction, the lever will return to its original position.

Adjusting the Length of the Rod or

Lever

The length of the rod or lever can be

adjusted by loosening the Allen-head

bolt.

Adjustable Roller Levers:

(WLCA12-N, WLCA12-2-N,

WLCA12-2N-N, WLG12-N)

Adjustable rod lever:

(WLCL-N, WLCL-2-N,

WLCL-2N-N, WLGL-N, WLCAL4-N)

Selecting the Roller Position

There are four types of Switches with

Fork Lever Locks for use depending on

the roller position.

Fork lever lock:

(WLCA32-4

@-N)

An explanation of the operation of fork lever locks is provided after this

table.

Item

Applicable models and Actuators

Details

Loosen this

Allen-head bolt

and adjust the

length of the rod.

Adjustment

range radius:

25 to 89 mm

Adjustable Roller Levers:

Adjustable Rod Levers:

Loosen this

Allen-head bolt

and adjust the

length of the

lever.

Adjustment

range radius:

24 to 140 mm

WLCA32-41-N

WLCA32-43-N

WLCA32-42-N

WLCA32-44-N

NC terminal: ON

NO terminal: ON

NO terminal: ON

Example