| 전자부품 데이터시트 검색엔진 |
|
FDA803U 데이터시트(PDF) 60 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
FDA803U 데이터시트(HTML) 60 Page - STMicroelectronics |
|
60 / 76 page ![]() I2C bus interface FDA803U 60/76 DS12497 Rev 2 13.8 I2S, I2C and Enable relationship FDA803U provides both I2C and I2S communication by means of two different digital interfaces but connected to each other interfaces and clock domains. To program the I2C interface the I2S clock must be present, and at least 10 ms should have passed from the Enable pins setting event. In FDA803U the digital part has different clock domains: The I2C programming block clock is the I2C clock The I2S receiver clock which is the I2S clock The system clock which is generated by an internal PLL. The I2C commands are not effective if I2S clock is not present. However they will remain memorized inside I2C registers. If I2S clock is lost the digital machine goes in standby. I2S clock (SCK) should be given to device before enabling it (Enable pins set to ‘out of standby’). |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |