- 14 -

ADDING CHANNELS TO THE TV’S MEMORY

Programming channels automatically

Your TV can automatically detect all active channels in your

area and store them in its memory. After the channels are

stored automatically, you can manually add or erase individual

channels .

To program channels automatically:

Press MENU, and then press

or

until the SET UP

menu appears.

Press

or

until the TV/CABLE is highlighted, and then

press ENTER to display the pull-down menu.

Press

or

to highlight either TV or CABLE, depending

on which you use. If you use an antenna, highlight TV; if

you use cable, highlight CABLE.

Press ENTER.

Press

to select CH PROGRAM.

Press ENTER to start channel programming. The TV will

automatically cycle through all the TV or Cable channels

(depending on which you selected), and store all active

channels in the channel memory.

While the TV is cycling through the channels, the mes-

sage “Programming Now”-Please Wait” appears.

When channel programming is complete,the message

“Completed” appears.

Press Channel

or

to view the programmed channels.

When you press Channel

or

, your TV will stop only on the channels stored in the TV’s channel memory.

Follow the steps below and on the next page to program all active channels into the TV’s memory.

Adding and erasing channels manually

After you have programmed the channels automatically, you

can manually add or erase specific channels.

To add or erase channels:

Select the channel you want to add or erase. If you are

adding a channel, you must select the channel using the

Channel Number buttons.

Press MENU, and then press

or

until the SET UP

menu appears.

Press

or

to highlight ADD/ERASE, and then press

ENTER to display the pull-down menu.

Press

or

to select ADD or ERASE, depending on the

function you want to perform.

Repeat steps 1-4 for other channels you want to add or

erase.

1

2

3

4

5

6

7

8

1

2

2

3

4

5