ZHCONNECTOR

ZH CONNECTOR

ZH CONNECTOR

ZH CONNECTOR

1.5 mm pitch/Disconnectable Crimp style connectors

Emboss Tape

ZHCONNECTOR

ZH CONNECTOR

ZH CONNECTOR

ZH CONNECTOR

1.5 mm pitch/Disconnectable Crimp style connectors

Emboss Tape

(7.1)

4.6

1.5±0.05

1.5 min.

φ0.7±0.03

φ0.7±0.03

1.5±0.05

3.5

1.5 min.

Top entry type

Side entry type

1.5×(N-1)+0.9

0.7 min.

1.5±0.05

0.9±0.05

φ1.1+0.10

（7.4）

1.5±0.05

1.3±0.1

1.5±0.1

0.7 min.

3.7

1.5±0.05

1.4±0.1

1.1±0.1

0.7 min.

（7.4）

SM2 type

Side entry type

Side entry type

SM4 type

Top entry type

The ZH connector is very small with

a mounting height of 5.6 mm and a thickness

of only 3.5 mm. Contact retention lances on

the housing make insertion easier, while

the dimple at the center of the contact

ensures reliable contact with the post.

● Compact, low profile design

● Housing lances

● Reliable contact construction

● Distortion resistant construction

● Compatible with the ZR insulation

displacement connectors

Specifications

• Current rating: 1.0 A AC/DC (AWG #26)

• Voltage rating: 50 V AC/DC

• Temperature range: -25℃ to +85℃

(including temperature rise in applying

electrical current)

• Contact resistance: Initial value/ 20 mΩ max.

After environmental tests/ 30 mΩ max.

• Insulation resistance: 500 MΩ min.

• Withstanding voltage: 500 VAC/minute

• Applicable wire: AWG #32 to #26

• Applicable PC board thickness: 0.6 to 1.2 mm, 1.6 mm

* In using the products, refer to "Handling Precautions for Terminals

and Connectors" described on our website (Technical documents

of Product information page).

* RoHS2 compliance

* Dimensional unit: mm

* Contact JST for details.

Standards

Recognized E60389

Certified LR20812

〈Through-hole type (viewed from soldering side) 〉

Note: 1. Tolerances are non-cumulative: ± 0.05 mm for all centers.

2. Hole dimension differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions

should be larger. The dimensions above should serve as a guideline. Contact JST for details.

〈SMT type (viewed from connector mounting side) 〉

Note: 1. N...Number of circuits

2. Tolerances are non-cumulative: ± 0.05 mm for all centers.

3. The dimensions above should serve as a guideline. Contact JST for details.

1

®

®

®

®

®

PC board layout and Assembly layout