OPA310 datasheet(32/57 Pages) TI

32 / 57 page

9 Application and Implementation

Note

Information in the following applications sections is not part of the TI component specification,

and TI does not warrant its accuracy or completeness. TI’s customers are responsible for

determining suitability of components for their purposes, as well as validating and testing their design

implementation to confirm system functionality.

9.1 Application Information

The OPAx310 family of rail-to-rail input and output operational amplifiers is specifically designed for high output

current applications. The devices operate from 1.5 V to 5.5 V, are unity-gain stable, and are also an excellent

choice for a wide range of general-purpose applications. The class AB output stage is capable of driving small

resistive loads connected to any point between V+ and V– as long as the device is not forced into short circuit

mode or thermal shutdown mode. The input common-mode voltage range includes both rails and allows the

OPAx310 series to be used in many single-supply or dual supply configurations.

9.2 Typical Application

9.2.1 OPAx310 Low-Side, Current Sensing Application

Figure 9-1 shows the OPAx310 configured in a low-side current sensing application.

LOAD

BUS

SHUNT

0.1 Ÿ

57.6 NŸ

1.2 NŸ

OUT

5 V

Device

Figure 9-1. OPAx310 in a Low-Side, Current-Sensing Application

OPA310, OPA2310, OPA4310

SBOSAA1D – APRIL 2022 – REVISED OCTOBER 2022

www.ti.com

Submit Document Feedback

Product Folder Links: OPA310 OPA2310 OPA4310

OPA310 데이터시트(PDF) 32 Page - Texas Instruments