5

A product Line of

Diodes Incorporated

PI3WVR626

www.diodes.com

March 2020

Diodes Incorporated

PI3WVR626

Document Number DS42006 Rev 3-2

VCC, Supply Voltage, ................................................................ -0.5V to 4.5V

VCNTRL, DC Input Voltage (OE, SEL)(1)..................................-0.5V to VCC

VSW, DC Switch I/O Voltage(1,2)............................................... -0.3V to 2.5V

IIK, DC Input Diodes Current ........................................................... -50mA

IOUT, DC Output Current .....................................................................25mA

TSTG, Storage Temperature ................................................ -65oC to +150oC

Tj, Junction Temerature.........................................................................125oC

ESD:

Human Body Model, JEDEC: JESD22-A114, All Pins.................... 2.0kV

Charged Device Model, JEDEC: JESD22-C101................................ 1.0kV

Note:

Stresses greater than those listed under MAXIMUM RAT-

INGS may cause permanent damage to the device. This is a

stress rating only and functional operation of the device at

these or any other conditions above those indicated in the

operational sections of this specification is not implied.

Exposure to absolute maximum rating conditions for ex-

tended periods may affect reliability.

Absolute Maximum Ratings

(Above which useful life may be impaired. For user guidelines, not tested.)

Note:

1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed.

2. VSW refers to analog data switch paths.

Recommended Operating Conditions

The Recommended operating Conditions table defines the conditions for actual device operation. Recommended operating

conditions are specified to ensure optimal performance to the datasheet specifications.

Symbol

Description

Test Conditions

Min.

Max.

Units

VCC

Supply Voltage

1.5

3.6

V

VCNTRL

Control Input Voltage (SEL, OE)(1)

0

VCC

V

VSW

Switch I/O Voltage (CLK-, D-, CLKA-, CLKB-, DA-, DB-)

- HS Mode

0

0.5

V

- LP Mode

0

1.3

V

TA

Operating Temperature

-40

+85

oC

Note:

1. The control inputs must be held HIGH or LOW; they must not float.

DC and Transient Characteristics

All typical values are at TA = 25ºC unless otherwise specified.

Symbol

Description

Test Conditions

VCC (V)

TA = -40oC to +85oC

Units

Min. Typ. Max.

VIK

Clamp Diode Voltage (OE, SEL)

IIN = -18mA

1.5

-1.2

-0.6

V

VIH

Input Voltage High

SEL, OE

1.5 to 3.3

-1.0

V

VIL

Input Voltage Low

SEL, OE

1.5 to 3.3

0.5

V

IIN

Control Input Leakage (OE, SEL)

VCNTRL = 0 to VCC

3.3

-1.0

1.0

μA

INO(OFF)

INC(OFF)

Off Leakage Current of Port CLKA-,

DA-, CLKB- and DB-

VSW = 0.0 ≤ DATA ≤ 1.3V

3.3

-1.0

1.0

μA

IA(ON)

On Leakage Current of Common

Ports (CLK-, D-)

VSW = 0.0 ≤ DATA ≤ 1.3V

3.3

-1.0

1.0

μA