MPX100 SERIES

4

Motorola Sensor Device Data

PRESSURE (P1)/VACUUM (P2) SIDE IDENTIFICATION TABLE

Motorola designates the two sides of the pressure sensor

as the Pressure (P1) side and the Vacuum (P2) side. The

Pressure (P1) side is the side containing silicone gel which

isolates the die from the environment. The differential or

gauge sensor is designed to operate with positive differential

pressure applied, P1 > P2. The absolute sensor is designed

for vacuum applied to P1 side.

The Pressure (P1) side may be identified by using the

table below:

Part Number

Case Type

Pressure (P1) Side Identifier

MPX100A, MPX100D

Stainless Steel Cap

MPX100DP

344C–01

Side with Part Marking

MPX100AP, MPX100GP

344B–01

Side with Port Attached

MPX100AS

344E–01

Side with Port Attached

MPX100ASX

344F–01

Side with Port Attached

ORDERING INFORMATION

MPX100 series pressure sensors are available in absolute, differential and gauge configurations. Devices are available in the

basic element package or with pressure port fittings which provide printed circuit board mounting ease and barbed hose pres-

sure connections.

Device Type

Options

Case Type

MPX Series

Device Marking

Basic Element

Absolute, Differential

Case 344–15

MPX100A

MPX100D

MPX100A

MPX100D

Ported Elements

Differential

Case 344C–01

MPX100DP

MPX100DP

Absolute, Gauge

Case 344B–01

MPX100AP

MPX100GP

MPX100AP

MPX100GP

Absolute, Gauge Stove Pipe

Case 344E–01

MPX100AS

MPX100GS

MPX100A

MPX100D

Absolute, Gauge Axial

Case 344F–01

MPX100ASX

MPX100GSX

MPX100A

MPX100D