UIPMA, UIPMC

www.vishay.com

Vishay MCB

Revision: 20-Sep-2022

3

Document Number: 32537

For technical questions, contact: mcbprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MOUNTING REQUIREMENTS FOR UIPMA

1. The shape of the customer interface over the active area shall be:

2. The roughness of the customer interface over the active area shall be:

3. Before sticking the sensor, the interface surface shall be free of all traces of dirt, grease, foreign objects, and burrs.

4. The bending of the flat flex cable shall be: Ø 3 mm min.

ELECTRICAL DIAGRAM

The voltage varies according to the position of the presser

on the deformable membrane.

SPECIFIC VERSIONS (on request)

• Other electrical or mechanical characteristics

• Other bases

• Integration in equipment

• Other versions: outdoor design, ...

• Integration in equipment

(flat flex cable, contacts, wires, ...)

DIMENSIONS in millimeters

UIPMC

0.05

Ra 1.6

Active side

Back

Ø 12 (centering diameter)

Ø 18

Ø 24

Ø 30

25

R5 (x 2)

Adhesive area

Pin 1

Pin 2

Pin 3

Pin 1

V+

Pin 2

Collector

Pin 3

GND

15

Connector:

Duflex HSNG SR1 100-2P3S

(Ref: 67013-003LF or alternative)

Duflex contact female

(Ref: 76785-301LF or alternative)

F

Yellow

Red

Green