Note

The ferrite bead can be placed closer to the device as long as it is placed > 8 mm from the device.

This placement avoids capacitive and electromagnetic coupling to the output of the ferrite bead. If the

ferrite bead is placed < 8 mm, the filtering effect of the ferrite bead is greatly reduced. If the ferrite

bead is routed through a via to the back side of the board, ensure adequate ground plane between the

layers if the ferrite bead is in this area.

www.ti.com

TPSM82913

SLVSGJ4A – OCTOBER 2022 – REVISED DECEMBER 2022

Copyright © 2022 Texas Instruments Incorporated

Submit Document Feedback

29

Product Folder Links: TPSM82913