T54

www.vishay.com

Vishay

Revision: 16-Dec-2022

11

Document Number: 40212

For technical questions, contact: polytech@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Stability at low and

high temperatures

-55 °C

Capacitance change

Within -20 % to 0 % of initial value

Dissipation factor

Shall not exceed 150 % of initial limit

Leakage current

n/a

25 °C

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Within initial limit

85 °C

Capacitance change

Within -0 % to +50 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 1000 % of initial value

105 °C

Capacitance change

Within -0 % to +50 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 1000 % of initial limit

Surge voltage

105 °C, 1000 successive test cycles at 1.3 of

rated voltage in series with a 33

Ω resistor at

the rate of 30 s ON, 30 s OFF

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 300 % of initial limit

PERFORMANCE CHARACTERISTICS (for Discrete Capacitors T54EE and Component Stacks)

ITEM

CONDITION

POST TEST PERFORMANCE

Shock

(specified pulse)

MIL-STD-202, method 213, condition E,

1000 g peak

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 300 % of initial limit

Vibration

MIL-STD-202, method 204, condition D,

10 Hz to 2000 Hz 20 g peak

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 300 % of initial limit

There shall be no mechanical or visual damage to capacitors

post-conditioning.

Shear test

Apply a pressure load of 17.7 N for 10 s ± 1 s

horizontally to the center of capacitor side body

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 300 % of initial limit

PRODUCT INFORMATION

Polymer Guide

www.vishay.com/doc?40076

Moisture Sensitivity

www.vishay.com/doc?40135

Infographic

www.vishay.com/doc?48084

Sample Board

www.vishay.com/doc?48073

FAQ

Frequently Asked Questions

www.vishay.com/doc?42106

PERFORMANCE CHARACTERISTICS (for Discrete Capacitors T54EE)

ITEM

CONDITION

POST TEST PERFORMANCE