| 전자부품 데이터시트 검색엔진 |
|
PI74FCT273ATS 데이터시트(PDF) 3 Page - Pericom Semiconductor Corporation |
|
|
|||||||||||||||||||||||||||||
PI74FCT273ATS 데이터시트(HTML) 3 Page - Pericom Semiconductor Corporation |
|
3 / 6 page ![]() 3 PS2013B 10/07/04 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 PI74FCT273T Octal D Flip-Flop with Master Reset Power Supply Characteristics Parameters Description Test Conditions(1) Min. Typ(2) Max. Units ICC Quiescent Power VCC = Max. VIN = GND or VCC 0.1 500 µA Supply Current ∆ICC Supply Current per VCC = Max. VIN = 3.4V(3) 0.5 2.0 mA per Input @ TTL HIGH ICCD Supply Current per VCC = Max., Outputs Open VIN = VCC 0.15 0.25 mA/ Input per MHx(4) MR = Vcc, One Input Toggling VIN = GND MHz 50% Duty Cycle IC Total Power Supply VCC = Max., Outputs Open VIN = VCC 1.5 3.5(5) mA Current(6) fCP = 10 MHZ, 50% Duty Cycle VIN = GND MR = Vcc, 50% Duty Cycle VIN = 3.4V 2.0 3.5(5) One Bit toggling at fI = 5 MHZ VIN = GND VCC = Max., Outputs Open VIN = VCC 3.8 7.3(5) fCP = 10 MHZ, 50% Duty Cycle VIN = GND MR = VCC, 50% Duty Cycle VIN = 3.4V Eight Bits toggling at VIN = GND 6.0 16.3(5) fI = 2.5 MHZ, 50% Duty Cycle Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device. 2. Typical values are at Vcc = 5.0V, +25°C ambient. 3. Per TTL driven input (VIN = 3.4V); all other inputs at Vcc or GND. 4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations. 5. Values for these conditions are examples of the Icc formula. These limits are guaranteed but not tested. 6. IC =IQUIESCENT + IINPUTS + IDYNAMIC IC = ICC + ∆ICC DHNT + ICCD (fCP/2 + fINI) ICC = Quiescent Current ∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4V) DH = Duty Cycle for TTL Inputs High NT = Number of TTL Inputs at DH ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL) fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices) fI = Input Frequency NI = Number of Inputs at fI All currents are in milliamps and all frequencies are in megahertz. |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |