Measurement Computing

(508) 946-5100

4

info@mccdaq.com

mccdaq.com

USB-DIO32HS

April 2018. Rev 5

DS USB-DIO32HS

© Measurement Computing Corporation

Power

Supply current, USB source

During enumeration: <100 mA

After USB enumeration: <500 mA

+VO voltage output range

After USB enumeration: 5 V, ± 5%

+VO output current

After USB enumeration: 24 mA max per pin, constrained to 384 mA across

all output pins (digital outputs, pacer clock outputs, and +VO)

USB

Device type: USB 2.0 (high-speed)

Device compatibility: USB 1.1, USB 2.0, USB 3.0

USB cable length: 3 m (9.84 ft) max

Ordering

Environmental

Operating temperature range: 0 °C to 50 °C

Storage temperature range: –40 °C to 70 °C

Humidity: 0% to 90% non-condensing

Mechanical

Signal I/O Connector

Standard: 2 banks of screw-terminals (wire gauge range 16 AWG to 30 AWG)

OEM: Two 1 × 28 pin 0.1 in. pitch headers

Dimensions (L × W × H):

Standard: 128.52 x 88.39 × 35.56 mm (5.06 × 3.48 × 1.43 in.)

OEM: 119.38 × 86.36 × 15.24 mm (4.70 × 3.40 × 0.60 in.)

Order Information

Hardware

Part No.

Description

USB-DIO32HS

USB digital I/O device with 32 bit-configurable

DIO lines, and I/O scan rates up to 8 MS/s max.

Includes USB cable and MCC DAQ software.

USB-DIO32HS-OEM

Board-only USB-based digital I/O board with

32 bit-configurable digital I/O lines, and I/O scan

rates up to 8 MS/s max.

Software also Available from MCC

Part No.

Description

TracerDAQ Pro

Out-of-the-box virtual instrument suite with strip chart,

oscilloscope, function generator, and rate generator –

professional version

DASYLab

Icon-based data acquisition, graphics, control, and analysis

software