7

Figure 10. Tape dimensions.

Figure 11. Tape leader and trailer dimensions.

NOTES:

1. ALL DIMENSIONS IN MILLIMETERS (INCHES).

2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.

8.00 ± 0.30

(0.315 ± 0.012)

USER FEED

DIRECTION

DIM. A

(SEE TABLE 1)

3.50 ± 0.05

(0.138 ± 0.002)

1.75 (0.069)

DIM. C

(SEE TABLE 1)

0.20 ± 0.05

(0.008 ± 0.002)

CARRIER TAPE

COVER TAPE

DIM. B

(SEE TABLE 1)

4.00 (0.157)

2.00 ± 0.05

(0.079 ± 0.002)

4.00 (0.157)

1.50 (0.059)

TABLE 1

DIMENSIONS IN MILLIMETERS (INCHES)

CATHODE

DIM. A

± 0.10 (± 0.004)

DIM. B

± 0.10 (± 0.004)

PART NUMBER

DIM. C

± 0.10 (± 0.004)

HSMF-C16x SERIES

1.80 (0.071)

0.95 (0.037)

0.60 (0.024)

END

START

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MOUNTED WITH

COMPONENTS

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MINIMUM OF

230 mm

(9.05 INCH)

MAY CONSIST

OF CARRIER

AND/OR

COVER TAPE.