GaAs Broadband DPDT Diversity Switch

2.0 - 6.0 GHz

MASWSS0190

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V1

1

RoHS

Compliant

Features

• 802.11a + b/g Dual Band Applications

• Broadband Performance: 2.0 - 6.0 GHz

• Low Insertion Loss: 0.75 dB @ 2.4 GHz

0.9 dB @ 4.9 to 6.0 GHz

• High Isolation: 43 dB @ 2.4 GHz

31 dB @ 4.9 to 6.0 GHz

• Fast Switching Speed: 0.5 µm GaAs PHEMT

• Lead-Free 2 mm 8-Lead UTDFN Package

• Electrolytic Gold Plate over Nickel Plate

• Halogen-Free “Green” Mold Compound

• RoHS* Compliant and 260°C Reflow Compatible

Description

M/A-COM’s MASWSS0190 is a broadband GaAs

PHEMT MMIC diversity switch available in a low

cost, lead-free, ultra thin 2 mm 8-lead UTDFN

package.

The MASWSS0190 is ideally suited for

applications where very small size and low cost are

required.

Typical applications are for WLAN IEEE 802.11a

and 802.11b/g systems that employ two antennas

for transmit and receive diversity. Other applications

include

cordless

phones

and

base

stations.

Designed

for

high

power,

this

DPDT

switch

maintains high linearity up to 6.0 GHz.

The MASWSS0190 is fabricated using a 0.5 micron

gate length GaAs PHEMT process.

The process

features

full

passivation

for

performance

and

reliability.

Ordering Information

Part Number

Package

MASWSS0190TR-3000

7 inch, 3000 piece reel

MASWSS0190SMB

Sample Test Board

Functional Schematic

Pin No.

Pin Name

Description

1

Rx

Receive Port

2

GND

Ground

3

GND

Ground

4

Tx

Transmit Port

5

Control 1

6

ANT1

Antenna Port 1

7

ANT2

Antenna Port 2

8

Control 2

9

Paddle

1

RF and DC Ground

Pin Configuration

1. The exposed pad centered on the package bottom must be

connected to RF and DC ground.

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.