ADAF1080BCPZ datasheet(31/36 Pages) AD

부품명	ADAF1080BCPZ

상세설명	Integrated 8 mT AMR Magnetic Field Sensor and Signal Conditioner

PDF	36 Pages

Scroll/Zoom	100%

제조업체	AD [Analog Devices]

홈페이지	http://www.analog.com

Logo

31 / 36 page

Data Sheet

ADAF1080

APPLICATIONS INFORMATION

analog.com

Rev. 0 | 31 of 36

TEMPERATURE MEASUREMENT

The VTEMP output pin is a voltage output for temperature monitor-

ing purposes. This output voltage is ratiometric to the supply. For

maximum accuracy, an initial calibration at a known temperature is

recommended.

A temperature measurement can be extracted from the measure-

ment of the VTEMP pin by the following equation:

TVTEMP=VTEMP−VTEMPCAL−TCVTEMP×TCAL

TCVTEMP

(18)

where:

TVTEMP is the calibrated temperature of the sensor.

VTEMP is the output of the VTEMP pin.

VTEMP

CALis the output of the VTEMP pin at the calibration tempera-

ture.

TCVTEMP is the temperature coefficient of the sensor as shown in

Table 8.

TCAL is the temperature at which the calibration was performed.

VTEMP must be left disconnected when not in use.

Figure 57. Circuit Diagram for Temperature Measurements Using VTEMP

ADAF1080BCPZ 데이터시트(PDF) 31 Page - Analog Devices