MPC9773AE datasheet(7/19 Pages) FREESCALE

7 / 19 page

Advanced Clock Drivers Device Data

Freescale Semiconductor

MPC9773

PLL Closed Loop Bandwidth(12)

÷ 4 feedback

÷ 6 feedback

÷ 8 feedback

÷ 10 feedback

÷ 12 feedback

÷ 16 feedback

÷ 20 feedback

÷ 24 feedback

÷ 32 feedback

÷ 40 feedback

1.20 – 3.50

0.70 – 2.50

0.50 – 1.80

0.45 – 1.20

0.30 – 1.00

0.25 – 0.70

0.20 – 0.55

0.17 – 0.40

0.12 – 0.30

0.11 – 0.28

MHz

tLOCK

Maximum PLL Lock Time

1. AC characteristics apply for parallel output termination of 50

Ω to VTT.

2. The input reference frequency must match the VCO lock range divided by the feedback divider ratio: fREF = fVCO ÷ (M ⋅ VCO_SEL).

3. VCMR (AC) is the crosspoint of the differential input signal. Normal AC operation is obtained when the crosspoint is within the VCMR range

and the input swing lies within the VPP (AC) specification. Violation of VCMR or VPP impacts static phase offset t(∅).

4. Calculation of reference duty cycle limits: DCREF,MIN = tPW,MIN ⋅ fREF ⋅ 100% and DCREF,MAX = 100% – DCREF,MIN.

5. The MPC9773 will operate with input rise/fall times up to 3.0 ns, but the AC characteristics, specifically t(∅), tPW,MIN, DC and fMAX can only

be guaranteed if tR, tF are within the specified range.

6. CCLKx or PCLK to FB_IN. Static phase offset depends on the reference frequency. t(∅) [s] = t(∅) [°] ÷ (fREF ⋅ 360°).

7. Excluding QSYNC output. Refer to APPLICATIONS INFORMATION for part-to-part skew calculation.

8. Output duty cycle is DC = (0.5

± 200 ps ⋅ fOUT) ⋅ 100%. E.g., the DC range at fOUT = 100 MHz is 48% < DC < 52%. T = output period.

9. Cycle jitter is valid for all outputs in the same divider configuration.

10. Period jitter is valid for all outputs in the same divider configuration.

11. I/O jitter is valid for a VCO frequency of 400 MHz. Refer to APPLICATIONS INFORMATION for I/O jitter vs. VCO frequency.

12. –3 dB point of PLL transfer characteristics.

Table 10. AC Characteristics (VCC = 3.3 V ± 5%, TA = -40°C to 85°C)(1), (2)

Symbol

Characteristics

Min

Typ

Max

Unit

Condition

MPC9773AE 데이터시트(PDF) 7 Page - Freescale Semiconductor, Inc

MPC9773AE 데이터시트(HTML) 7 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

데이터시트 다운로드

링크 URL