Symbol

Parameter

Test conditions

Min.

Typ.

Max.

Unit

COUT

Output capacitor

Capacitance (see typical performance

characteristics for stability)

0.47

10

µF

ESR

0.056

6

Ω

1. Dropout voltage is the input-to-output voltage difference at which the output voltage is 100 mV below its

nominal value. This specification does not apply to output voltages below 1.5 V.

2. During shutdown and at no load, P-channel leakage current flowing through the internal resistor divider

causes the VOUT rise.

3. Turn-on time is the time measured between the enable input just exceeding VEN high value and the output

voltage just reaching 95% of its nominal value.

STLQ015

Electrical characteristics

DS6765 - Rev 7

page 7/19