전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

HC05V12GRS/D 데이터시트(PDF) 52 Page - NXP Semiconductors

부품명 HC05V12GRS/D
상세설명  M68HC05 Core with On-Chip Oscillator for Crystal/Ceramic
PDF  240 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  NXP [NXP Semiconductors]
홈페이지  http://www.nxp.com
Logo NXP - NXP Semiconductors

HC05V12GRS/D 데이터시트(HTML) 52 Page - NXP Semiconductors

Back Button HC05V12GRS/D Datasheet HTML 48Page - NXP Semiconductors HC05V12GRS/D Datasheet HTML 49Page - NXP Semiconductors HC05V12GRS/D Datasheet HTML 50Page - NXP Semiconductors HC05V12GRS/D Datasheet HTML 51Page - NXP Semiconductors HC05V12GRS/D Datasheet HTML 52Page - NXP Semiconductors HC05V12GRS/D Datasheet HTML 53Page - NXP Semiconductors HC05V12GRS/D Datasheet HTML 54Page - NXP Semiconductors HC05V12GRS/D Datasheet HTML 55Page - NXP Semiconductors HC05V12GRS/D Datasheet HTML 56Page - NXP Semiconductors Next Button
Zoom Inzoom in Zoom Outzoom out
 52 / 240 page
background image
Interrupts
General Release Specification
MC68HC05V12 — Rev. 1.0
Interrupts
4.2 Introduction
The MCU can be interrupted eight different ways:
1. Non-Maskable Software Interrupt Instruction (SWI)
2. External Asynchronous Interrupt (IRQ)
3. External Interrupt via IRQ on PC0–PC7 (IRQ)
4. Internal 16-Bit Timer Interrupt (TIMER)
5. Internal BDLC Interrupt (BDLC)
6. Internal Serial Peripheral Interface Interrupt (SPI)
7. Internal 8-Bit Timer Interrupt (CTIMER)
8. Internal Gauge Interrupt (GAUGE)
4.3 CPU Interrupt Processing
Interrupts cause the processor to save register contents on the stack
and to set the interrupt mask (I bit) to prevent additional interrupts. Unlike
RESET, hardware interrupts do not cause the current instruction
execution to be halted, but are considered pending until the current
instruction is complete.
If interrupts are not masked (I bit in the CCR is clear) and the
corresponding interrupt enable bit is set, then the processor will proceed
with interrupt processing. Otherwise, the next instruction is fetched and
executed. If an interrupt occurs, the processor completes the current
instruction, then stacks the current CPU register states, sets the I bit to
inhibit further interrupts, and finally checks the pending hardware
interrupts. If more than one interrupt is pending after the stacking
operation, the interrupt with the highest vector location shown in
Table 4-1 will be serviced first. The SWI is executed the same as any
other instruction, regardless of the I-bit state.
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com