STFPC311 datasheet(24/39 Pages) STMICROELECTRONICS

부품명	STFPC311

상세설명	Front panel controller/driver with standby power management

PDF	39 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

24 / 39 page

8 Default status

STFPC311

24/39

Default status

8.1

Power-up default status

8.2

STANDBY status

The display remains ON during STANDBY only if the -20V is present. If the -20V is absent, the

display turns OFF. When the display wakes up from STANDBY and –20V is applied, the display

turns ON with previous value.

Switching off the display before entering the STANDBY state is recommended.

When the same display configuration command is sent, the display remains ON. When the

display configuration command is changed, the display is OFF.

Only hot key detection can wake the system up from STANDBY condition.

Table 5.

Default States

S. N

Functions

Default Status

1Display

OFF

Key-scan

3IR

Display mode

12 Seg/16Bit

Display address

00H

RC Protocol

DC-5

7LED

OFF

Dimming

1/16 Duty factor

Hot Kets (IR and FP)

Disabled

Watchdog timer

10s

STFPC311 데이터시트(PDF) 24 Page - STMicroelectronics