| 전자부품 데이터시트 검색엔진 |
|
9UMS9633B 데이터시트(PDF) 13 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
9UMS9633B 데이터시트(HTML) 13 Page - Renesas Technology Corp |
|
13 / 23 page ![]() R31DS0110EU0100 Rev.1.00 Page 13 Jan 18, 2022 9UMS9633B Datasheet Table 7. Byte 0 – PLL and Divider Enable Register Bit(s) Name Description Type 0 1 Default 7 PLL1 Enable This bit controls whether the PLL driving the CPU and SRC clocks is enabled or not. RW 0 = Disabled 1 = Enabled 1 6 PLL2 Enable This bit controls whether the PLL driving the DOT and clock is enabled or not. RW 0 = Disabled 1 = Enabled 1 5 PLL3 Enable This bit controls whether the PLL driving the LCD clock is enabled or not. RW 0 = Disabled 1 = Enabled 1 4 Reserved 0 3 CPU Divider Enable This bit controls whether the CPU output divider is enabled or not. NOTE: This bit should be automatically set to ‘0’ if bit 7 is set to ‘0’. RW 0 = Disabled 1 = Enabled 1 2 SRC Output Divider Enable This bit controls whether the SRC output divider is enabled or not. NOTE: This bit should be automatically set to ‘0’ if bit 7 is set to ‘0’. RW 0 = Disabled 1 = Enabled 1 1 LCD Output Divider Enable This bit controls whether the LCD output divider is enabled or not. NOTE: This bit should be automatically set to ‘0’ if bit 5 is set to ‘0’. RW 0 = Disabled 1 = Enabled 1 0 DOT Output Divider Enable This bit controls whether the DOT output divider is enabled or not. NOTE: This bit should be automatically set to ‘0’ if bit 6 is set to ‘0’. RW 0 = Disabled 1 = Enabled 1 Table 8. Byte 1 – PLL SS Enable/Control Register Bit(s) Name Description Type 0 1 Default 7 PLL1 SS Enable This bit controls whether PLL1 has spread enabled or not. Spread spectrum for PLL1 is set at -0.5% down-spread. Note that PLL1 drives the CPU and SRC clocks. RW 0 = Disabled 1 = Enabled 1 6 PLL3 SS Enable This bit controls whether PLL3 has spread enabled or not. Note that PLL3 drives the SSC clock, and that the spread spectrum amount is set in bits 3-5. RW 0 = Disabled 1 = Enabled 1 5 PLL3 FS Select These 3 bits select the frequency of PLL3 and the SSC clock when Byte 1 Bit 6 (PLL3 Spread Spectrum Enable) is set. RW See LCD Spread Select (Pin 20/21) table 0 4 0 3 0 2 Reserved 0 1 Reserved 0 0 Reserved 0 |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |