1

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard

C1070_C0G_HV_FT-CAP_SMD • 2/28/2023

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Built Into Tomorrow

Benefits

• Operating temperature range of −55°C to +125°C

• Superior flex performance (up to 5 mm)

• Capacitance offerings ranging from 1 pF to 120 nF

• DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV, 2.5 KV,

3 KV and 10KV

• EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220 and 2225

• Extremely low ESR and ESL

• High ripple current capability

• No capacitance shift with voltage

• Negligible capacitance shift with respect to temperature

• No piezoelectric noise

• Lead (Pb)-Free, RoHS and REACH compliant

Applications

• High frequency power converters

• Wide bandgap (WBG), silicon carbide (SiC) and gallium nitride (GaN) systems

• Snubber (high dV/dT)

• Resonant circuits (LLC, Wireless Charging, etc)

• Timing

• Filtering

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

High Voltage with Flexible Termination System (HV FT-CAP),

C0G Dielectric, 500 – 10,000 VDC (Commercial Grade)

Overview

KEMET’s High Voltage with Flexible Termination (HV FT-

CAP) surface mount MLCCs in C0G dielectric address the

primary failure mode of MLCCs–flex cracks. These devices

utilize a pliable and conductive silver epoxy between the

base metal and nickel barrier layers of the termination

system which inhibits the transfer of board stress to the

rigid ceramic body, therefore mitigating flex cracks which

can result in low IR or short circuit failures.

Flexible termination technology provides superior

flex performance over standard termination systems.

C0G (NP0) dielectric capacitors exhibit no change in

capacitance with respect to time and voltage and boasts a

negligible change in capacitance with reference to ambient

temperature. Capacitance change is limited to ±30ppm/°C

from −55°C to +125°C. These devices exhibit low ESR at

high frequencies and find conventional use as snubbers

or filters in applications such as switching power supplies

and lighting ballasts.