ISL70020SEH, ISL73020SEH

1. Overview

R34DS0007EU0104 Rev.1.04

Page 2 of 12

Apr 21, 2022

1.

Overview

1.1

Ordering Information

Ordering Part Number (Note 1)

Radiation Hardness

(Total Ionizing Dose)

Temperature

Range (°C)

Package

(RoHS Compliant)

Package

Drawing

ISL70020SEHML

HDR to 100krad(Si)

LDR to 75krad(Si)

-55 to +125

4 Ld SMD

J4.A

ISL70020SEHMX (Notes 3, 4)

HDR to 100krad(Si)

LDR to 75krad(Si)

-55 to +125

Die

N/A

ISL70020SEHX/SAMPLE (Notes 3, 2, 4)

N/A

-55 to +125

Die

N/A

ISL70020SEHL/PROTO (Note 2)

N/A

-55 to +125

4 Ld SMD

J4.A

ISL73020SEHML

LDR to 75krad(Si)

-55 to +125

4 Ld SMD

J4.A

ISL73020SEHMX (Note 3, 4)

LDR to 75krad(Si)

-55 to +125

Die

N/A

ISL73020SEHX/SAMPLE (Notes 3, 2, 4)

N/A

-55 to +125

Die

N/A

ISL73020SEHL/PROTO (Note 2)

N/A

-55 to +125

4 Ld SMD

J4.A

ISL70040SEHEV5Z (Note 5)

ISL70040SEH and ISL70020SEH Evaluation Board

Notes:

1. These Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with

both SnPb and Pb-free soldering operations.

2. The /PROTO and /SAMPLE parts are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity. These

parts are intended for engineering evaluation purposes only. The /PROTO and /SAMPLE parts meet the electrical limits and conditions

across the temperature range specified in this datasheet and are of the same form and fit as the ISL70020SEHML/ISL73020SEHML

devices. The /PROTO and /SAMPLE parts do not come with a Certificate of Conformance (C of C) and have no accompanying data or

documentation.

3. Die product tested at TA = + 25°C. The wafer probe test includes functional and parametric testing sufficient to make the die capable of

meeting the electrical performance outlined in “Electrical Specifications” on page 5.

4. The die solder bump composition is PbSn (95%/5%) with a melt point of 312°C. Recommended reflow profile includes a ramp-up to a

peak of 350-360°C with a dwell time of 3 minutes at/near the peak before ramp-down in a hydrogen forming gas with 3% hydrogen.

5. Evaluation board uses the /PROTO parts and /PROTO parts are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect

(SEE) immunity.

Table 1.

Key Differences Between Family of Parts

Part Number

Breakdown Voltage (V)

Drain Current (A)

rDS(ON) (mΩ)QG (nC)

ISL7x020SEH

40

65

3.5

19

ISL7x023SEH

100V

60

5

14

ISL7x024SEH

200V

7.5

45

2.5