59

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

The Centi Line - .075" Contact Spacing

Standard Data

The Cannon Centi connectors are especially

suitable for commercial applications such as

computers, instrumentation, communications

and audio equipment. They are available in D

subminiature size metal shell rectangular, plas-

tic shell rectangular and strip configurations.

All Centi connectors use the reliable twist pin

contact design in a 5 amp version terminated

on .075 (1.91) and .100 (2.54) centers. The

Centi contact is crimp removable, connectors

are available for customer assembly. Standard

crimp and assembly tools are available.

The twist pin contact is recessed within the

insulator housing while the rugged cylindrical

socket is exposed. When the connector halves

are mated, the chamfered sockets guide the

contact, now under compression, forms a

provide a high degree of reliability.

• Contact rating: 5 amps max, except BR

Series (2 amps max.)

• Minimum contact centers: 0.075 (1.91).

• Wire sizes: #22 thru #26 AWG, stranded or

solid.

• Contact termination: Multiple indent crimp.

• Contact retention: Crimp snap-in/removable.

• Contact materials and finish: Copper alloy,

gold- plated per ASTM B488, Type II, Code

C, Class 1.25.

• Mating/unmating force: 12 oz. per contact,

max.

Performance Data

Test

Method 301:

1,000 VAC at sea level

300 VAC at 70,000' altitude

Method 302, Condition A

Method 107, Condition A

+55˚C to +85˚C

Method 213, Condition I:

100 G's, 3 axes, 6 millisecond

duration sawtooth pulse

Method 204, Condition B:

15 G's, 10-2,000 Hz, 12 hours

500 cycles of mating and

unmating, 500 CPH max.

Method 106, Omit 7a and 7b

Method 101, Condition B:

48 hours

Method 307:

At 5 amps

-

No breakdown

No breakdown

5,000 megohms minimum

No physical damage

No physical damage

No loss of continutiy> 1/µsec

No physical damage

No loss of continuity> 1µsec

No mechanical or electrical defects

Insulation resistance > 100 megohms

Shall be capable of mating and unmating

and meet contact resistance requirements

9 milliohms maximum

4 lb. minimum axial load

(after 10 insertion extraction cycles)

Dielectric Withstanding

Voltage

Insulation Resistance

Thermal Shock

Physical Shock

Vibration

Durability

Moisture Resistance

Salt Spray

Contact Resistance

Contact Retention

Method

Criteria of Acceptance