| 전자부품 데이터시트 검색엔진 |
|
STM32L151CBT7ADTR 데이터시트(PDF) 57 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32L151CBT7ADTR 데이터시트(HTML) 57 Page - STMicroelectronics |
|
57 / 130 page ![]() DocID024330 Rev 5 57/130 STM32L151x6/8/B-A STM32L152x6/8/B-A Electrical characteristics 105 6.3.2 Embedded reset and power control block characteristics The parameters given in the following table are derived from the tests performed under the ambient temperature condition summarized in the following table. PD Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7(4) UFBGA100 package - 339 mW LQFP100 package - 435 TFBGA64 package - 308 LQFP64 package - 444 LQFP48 package - 364 UFQFPN48 package - 606 TA Ambient temperature for 6 suffix version Maximum power dissipation(5) –40 85 °C Ambient temperature for 7 suffix version Maximum power dissipation –40 105 TJ Junction temperature range 6 suffix version –40 105 °C Junction temperature range 7 suffix version –40 110 1. When the ADC is used, refer to Table 55: ADC characteristics. 2. It is recommended to power VDD and VDDA from the same source. A maximum difference of 300 mV between VDD and VDDA can be tolerated during power-up and operation. 3. To sustain a voltage higher than VDD+0.3 V, the internal pull-up/pull-down resistors must be disabled. 4. If TA is lower, higher PD values are allowed as long as TJ does not exceed TJ max (see Table 13: Thermal characteristics on page 56). 5. In low-power dissipation state, TA can be extended to -40°C to 105°C temperature range as long as TJ does not exceed TJ max (see Table 13: Thermal characteristics on page 56). Table 14. General operating conditions (continued) Symbol Parameter Conditions Min Max Unit Table 15. Embedded reset and power control block characteristics Symbol Parameter Conditions Min Typ Max Unit tVDD(1) VDD rise time rate BOR detector enabled 0 - ∞ µs/V BOR detector disabled 0 - 1000 VDD fall time rate BOR detector enabled 20 - ∞ BOR detector disabled 0 - 1000 TRSTTEMPO(1) Reset temporization VDD rising, BOR enabled - 2 3.3 ms VDD rising, BOR disabled(2) 0.4 0.7 1.6 VPOR/PDR Power on/power down reset threshold Falling edge 1 1.5 1.65 V Rising edge 1.3 1.5 1.65 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |