General Description

Features

ICS91309

0093H—12/09/08

Block Diagram

High Performance Communication Buffer

Pin Configuration

•

Zero input - output delay

•

Frequency range 10 - 133 MHz (3.3V)

•

5V tolerant input REF

•

High loop filter bandwidth ideal for Spread Spectrum

applications.

•

Less than 125 ps cycle to cycle Jitter

•

Skew controlled outputs

•

Available in 16 pin, 150 mil SSOP, SOIC & 4.40mm

TSSOP packages

•

Skew: Group-to-Group: <215 ps

•

Skew within Group: <100 ps

•

Commercial temperature range: 0°C to +70°C

The ICS91309 is a high performance, low skew, low jitter

zero delay buffer.

It uses a phase lock loop (PLL)

technology to align, in both phase and frequency, the REF

input with the CLKOUT signal. It is designed to distribute

high speed clocks in communication systems operating

at speeds from 10 to 133 MHz.

The ICS91309 provides synchronization between the

input and output. The synchronization is established via

CLKOUT feed back to the input of the PLL. Since the skew

between the input and output is less than +/- 350 pS, the

part acts as a zero delay buffer.

ICS91309 has two banks of four outputs controlled by two

address lines. Depending on the selected address line,

bank B or both banks can be put in a tri-state mode. In this

mode, the PLL is still running and only the output buffers

are put in a high impedance mode. The test mode shuts

off the PLL and connects the input directly to the output

buffers (see table below for functionality).

ICS91309 comes in a 16-pin 150 mil SOIC, SSOP or

4.40mm TSSOP package. In the absence of REF input,

the device will enter a powerdown mode. In this mode, the

PLL is turned off and the output buffers are pulled low.

Power down mode provides the lowest power consumption

for a standby condition.

16 pin SSOP, SOIC & TSSOP

REF

CLKA1

CLKA2

VDD

GND

CLKB1

CLKB2

FS2

CLKOUT

CLKA4

CLKA3

VDD

GND

CLKB4

CLKB3

FS1

1

2

3

4

5

6

7

8

16

15

14

13

12

11

10

9

Functionality

FS2 FS1 CLKA(1:4) CLKB(1:4)

CLKOUT

Ouput

Source

PLL

Shutdown

0

0

Tristate

Tristate

Driven

PLL

N

0

1

Driven

Tristate

Driven

PLL

N

10

PLL

Bypass

Mode

PLL Bypass

Mode

PLL

Bypass

Mode

REF

Y

1

1

Driven

Driven

Driven

PLL

N