TA430 datasheet(37/42 Pages) PICO

37 / 42 page

PicoVNA® 100 Series vector network analyzers

Sweep I/O characteristics

Sweep trigger output voltage

Low: 0 V to 0.8 V. High: 2.2 V to 3.6 V.

Sweep trigger input voltage

Low: −0.1 V to 1 V. High: 2.0 V to 4 V.

Sweep trigger input voltage

±6 V

No damage

Sweep trigger in/out connectors

BNC female on back panel

Measuring functions

Measuring parameters

11, S21, S22, S12

P1dB (1 dB gain compression)

AM to PM conversion factor (PM due to AM)

Mixer conversion loss, return loss, isolation and compression (PicoVNA 108 only)

Error correction

12 error term full S-parameter correction (insertable DUT)

12 error term full S-parameter correction (noninsertable DUT)

8 error term full S-parameter unknown through correction (noninsertable DUT)

11 (1-port correction)

De-embed (2 embedding networks may be specified)

Impedance conversion

21 (normalize, normalize + isolation)

21 (source match correction + normalize + isolation)

Averaging, smoothing

Hanning and Kaiser–Bessel filtering on time-domain measurements

Electrical length compensation (manual or auto)

Effective dielectric constant correction

Display channels

4 channels

Traces

Up to 4 live traces, two plot parameters and/or plot axis scalings per display

channel

Display formats

Amplitude (logarithmic and linear), phase, group delay, VSWR, real, imaginary,

Smith chart, polar, time domain

Memory trace

Up to 4 memory traces per display channel

Limit lines

6 segments on one trace, per channel (overlap allowed)

Markers

8 markers

Marker functions

Normal, Δ marker, fixed marker, peak/min. hold, 3 dB and 6 dB bandwidth

TA430 데이터시트(PDF) 37 Page - Pico Technology Ltd.

TA430 데이터시트(HTML) 37 Page - Pico Technology Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

데이터시트 다운로드

링크 URL