6

www.ittcannon.com

Dimensions shown in mm

Specifications and dimensions subject to change

The Snap Lock Environmental Series is

environmentally sealed connector created for printed

circuit board, black box, cable-to-cable or bulkhead

applications.

When your under-the-hood requirements call for

tough performance, the SLC "snaps" into a tightly

sealed connection that can withstand heat, shock and

vibration. The connector is designed to preserve the

integrity of the solid state package, while protecting

against contaminants - even when unmated.

Gold, tin/lead plated stamped contacts add durability.

A rugged, thermoplastic receptacle body maximizes

performance by withstanding temperature variances

from -40°C to +150°C (material rating).

The SLC series is available in 2, 5, 8, 10, 15 contact

cavity configurations. It can also be adapted to

robotics assembly. Should you requirement demand

higher density configurations, consult Customer

Service.

· Superior environmental sealing

· Material rating: -40°C to +150°C continuous

operation at rated current

· Available in sizes 2, 5, 8, 10, 15 contacts

· Crimp stamped gold, tin/lead plated contacts

· Hand insertable/removable contacts

· Current rating 5 A and 13 A versions

· Low millivolt drop

· Low contact resistance

· Small footprint on P.C. board and low profile

· Adaptable to robotics assembly

· Latch with tactile and audible feedback

· Increases durability and provides for minimum

installation

· Low installed cost

· Requires less PCB space

Contact Resistance

Insulation Resistance

Current Rating

Dielectric Withstanding Voltage

Applicable Cannon Specification

Material Rating Operating Temperature

Crimp Contacts

Wire Size

Wire Insulation Sealing Range

Contact Insertion

Contact Extraction

Contact Retention

Wire Strip Length

10m

Ω maximum

20M

Ω minimum (USCAR)

5 A signal continuous at 150°C all contacts, 2 position

13 A power continuous at 150°C all contacts, 5 position and 10 position only

1000 Vrms AC at sea level

SLC (CS-206) SLCT 5 & 10 (210) SLCT8 (216) SLCT 15 (206)

-40°C to +150°C

Semi-automatic or hand crimpable or fully automatic

20 - 16 AWG

1,98 (.078) to 3,30 (.130) dia.

No tool required. Suitable for automation.

Rear Removable

20 lbs. Minimum per contact

5,59 (.220) to 5,33 (.210)

Connector Housing

Contacts

Finish

Environmental Seal

High temperature thermoplastic

Copper alloy

Engaging area: Gold over nickel

Crimp/P.C. tail area: Tin/lead over nickel - standard offering

Tin/Lead over nickel - Option #2 all over

High temperature silicone elastomer

Snap/Clip-Lock Environmentally Sealed - Circular

Cannon SLC/SLC-T/CLC

Product Features and Benefits

Performance Specifications

Materials and Finishes