Nexperia

74LVC1G384

Bilateral switch

8. Limiting values

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol

Parameter

Conditions

Min

Max

Unit

VCC

supply voltage

-0.5

+6.5

V

VI

input voltage

[1]

-0.5

+6.5

V

IIK

input clamping current

VI < -0.5 V or VI > VCC + 0.5 V

-50

-

mA

ISK

switch clamping current

VI < -0.5 V or VI > VCC + 0.5 V

-

±50

mA

VSW

switch voltage

enable and disable mode

[2]

-0.5

VCC + 0.5

V

ISW

switch current

VSW > -0.5 V or VSW < VCC + 0.5 V

-

±50

mA

ICC

supply current

-

100

mA

IGND

ground current

-100

-

mA

Tstg

storage temperature

-65

+150

°C

Ptot

total power dissipation

Tamb = -40 ° C to +125 °C

[3]

-

250

mW

[1] The minimum input voltage rating may be exceeded if the input current rating is observed.

[2] The minimum and maximum switch voltage ratings may be exceeded if the switch clamping current rating is observed.

[3] For SOT353-1 (TSSOP5) package: Ptot derates linearly with 3.3 mW/K above 74 °C.

For SOT753 (SC-74A) package: Ptot derates linearly with 3.8 mW/K above 85 °C.

For SOT886 (XSON6) package: Ptot derates linearly with 3.3 mW/K above 74 °C.

For SOT1115 (XSON6) package: Ptot derates linearly with 3.2 mW/K above 71 °C.

For SOT1202 (XSON6) package: Ptot derates linearly with 3.3 mW/K above 74 °C.

For SOT1226-3 (X2SON5) package: Ptot derates linearly with 3.0 mW/K above 67 °C.

9. Recommended operating conditions

Table 6. Recommended operating conditions

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

VCC

supply voltage

1.65

-

5.5

V

VI

input voltage

0

-

5.5

V

VSW

switch voltage

[1]

0

-

VCC

V

Tamb

ambient temperature

-40

-

+125

°C

VCC = 1.65 V to 2.7 V

-

-

20

ns/V

Δt/ΔV

input transition rise and fall

rate

VCC = 2.7 V to 5.5 V

-

-

10

ns/V

[1] To avoid sinking GND current from terminal Z when switch current flows in terminal Y, the voltage drop across the bidirectional switch

must not exceed 0.4 V. If the switch current flows into terminal Z, no GND current will flow from terminal Y. In this case, there is no limit

for the voltage drop across the switch.

74LVC1G384

All information provided in this document is subject to legal disclaimers.

© Nexperia B.V. 2022. All rights reserved

Product data sheet

Rev. 9 — 16 August 2022

4 / 23